undefined
+
  • undefined

CBM screw compressor

Messages
  • Main features of Guanruida CBM screw compressor series

    1. Direct drive, no gears, higher reliability

    1). Avoid the possibility of failure caused by gear wear and increase reliability;

    2). Reduce vibration and noise;

    3). Higher transmission efficiency;

    4). Reduce the power consumption generated by the gear part;

    5). Reduce the lubricating oil consumed on the gears, and at the same time increase the life of the lubricating oil.

    2. The bearing is arranged in a special way and the force is better

    1). Roller bearings are used to bear radial loads;

    2). Tapered roller bearings bear axial and radial forces;

    3). No start-up pre-lubrication requirements.

    3. Balance piston (reduce bearing stress)

    The balance piston is installed on the two rotors. Under the action of pressure, oil enters the piston to produce a force that partially offsets the thrust load. This will reduce the thrust acting on the thrust bearing, and the bearing life will be longer.

    4. Long service life of screw main engine

    The American Sullair CBM screw main engine has been deeply involved in the process gas compressor field for decades. After continuous improvement and innovation, the performance is far superior to similar screw main engines of other brands. Practice has proved that the Sullair screw main engine has superior performance and good reliability, and the service life of the main engine is more than 80,000 hours.

    5. The screw host adopts a mechanical seal with zero leakage

    The Sullair screw main engine of the United States is optimized for high-pressure working conditions. The John Crane mechanical seal with reliable performance and two-stage seal structure is selected to ensure that the shaft seal of the screw main engine has zero leakage and no oil and natural gas overflow the compressor.

    1) The first stage is a labyrinth seal structure with reverse thread. If oil enters the shaft seal, this reverse thread will pump the oil back into the compressor;

    2) The second level is a high temperature resistant and hardened graphite sealing structure, and it has a good sealing effect with tungsten surface and fluorine rubber elastomer.

    6. High exhaust pressure

    Guanruida's CBM screw compressor has a maximum discharge pressure of 507psig (3.5Mpag), which is currently the world's highest technology for screw compressors.

    7. Environmentally friendly design

    Guanruida's CBM screw compressor originated from the United States. It pays special attention to environmental protection, automatically recovers impurities and special treatment, and the body is in harmony with nature.

    8. Satellite remote control

    The natural gas screw compressor can be equipped with PLC to realize remote remote control by satellite. At the same time, it uses the solar energy and wind energy on site to transmit signals to the remote base station, which can realize completely unattended and remote control operation under extremely harsh conditions.

    Main performance parameters of coal-bed methane screw compressor
    Project Technical parameters
    Medium Natural gas
    Inlet pressure 0~0.05MPaG
    Exhaust pressure 0.25MPaG
    Rated flow rate Nm3/d
    Rated power KW
    Drive method Combustion drive
    Remarks: The machine is placed directly at the wellhead, and the wellhead gas is used directly without electricity.  

     

Keywords:

Coal bed methane screw compressor natural gas screw compressor coal bed methane compressor

Previous

Next

Previous

Next