Intake valve GIV140A
1. Adjust the control ability of compressor air intake;
2. When starting, the valve is closed before the star——the triangle transition ends, until there is a control signal gas, the valve opens;
3. During normal operation, the corresponding control signal for opening and closing of the valve meets the requirements of air supply;
4. When closed, the built-in check valve is closed to prevent the backflow of oil and gas.
1. The intake valve is normally closed, which more effectively protects the compressor from starting at light load;
2. The intake valve body is sealed with PTEE and FKM two kinds of seals, with long life, safe and reliable;
3. The seal has good compatibility with lubricating oil;
4. The inside and outside of the casting are treated by electrophoresis and will never corrode;
5. The use of this valve can omit the oil shut-off valve in the oil circuit system and the discharge check valve at the compressor outlet.
6. Working pressure is 40bra.
|Full open flow||20~30 m3/min|
|Working system||Volume adjustment mode, the intake valve is normally closed|
|Function adjustment||The adjustable device is used to adjust the minimum pressure when the system is unloaded|
|Optional voltage||24V / 110V / 230V|
|Materials||Aluminum alloy / brass / FKM / PTFE|