Intake valve GIV40
1. Adjust the control ability of compressor air intake;
2. When starting, in star——triangular operation mode, the control signal closes the valve until the control signal is converted and the valve opens;
3. During normal operation, the corresponding control signal for opening and closing of the valve meets the requirements of air supply;
4. When closed, the built-in check valve is closed to prevent the backflow of oil and gas.
1. The intake pressure difference is the smallest when the straight-through intake structure is used;
2. The intake valve body is sealed with PTEE and FKM two kinds of seals, with long life, safe and reliable;
3. The seal has good compatibility with lubricating oil;
4. The inside and outside of the casting are sandblasted and will never corrode;
5. Integral shell;
6. The use of this valve can omit the oil stop valve in the oil circuit system and the discharge check valve at the compressor outlet.
|Full open flow||1~3 m3/min|
|Working system||On/Off switch system, the intake valve is normally open|
|Function adjustment||The adjustable device is used to adjust the minimum pressure when the system is unloaded|
|Optional voltage||24V / 110V / 230V|
|Materials||Aluminum alloy / brass / FKM / PTFE|